background image

Page 4 of 12 

 

1  Warnings 

Before using this appliance, read and follow all warnings and instructions in this 

manual, even if you are familiar with this product. 

 

This appliance is not intended for use by persons (including children) with reduced 

physical, sensory or mental capabilities, or lack of experience and knowledge, 

unless they have been given supervision or instruction concerning use of the 

appliance by a person responsible for their safety. 

 

Children should be supervised to ensure that they do not play with the appliance. 

 

2  Safety Directions 

Please read this instruction manual carefully before first use. It is advisable to keep 

this instruction manual for future reference. 

 

DO NOT

 use in a moist or humid area. 

 

DO NOT

 use the mirror if any of the LED globes are damaged. 

 

DO NOT

 store or use the appliance near high temperature areas. 

 

DO NOT

 run over the power supply cable with a vacuum cleaner. 

 

DO NOT

  use if the appliance malfunctions, abnormal noise, smell, smoke, is 

dropped or damaged in any manner or any breakage is found during operation.  

 

For electrical safety, any repairs to the product must be performed by a qualified 

electrical person only, or the product must be disposed of. 

 

DO NOT

 misuse the power supply cable. Never pull the appliance by the cable or 

pull to disconnect it from the outlet. Instead, grasp the power supply body and pull 

to disconnect. 

 

DO NOT

 use with damaged power supply cable or power supply body. 

 

DO NOT

 handle the power supply or mirror with wet hands. 

 

DO

 Keep power supply cable away from heated surfaces 

 

DO

 disconnect the power supply from the power supply when not in use,  

 

DO NOT

 hang items off the LED light globes. 

 

DO NOT

 attempt to modify this product in any way. 

 

 

Summary of Contents for Hollywood Mirror













Reviews: