Page 20 of 28
8.3 Timer
Use this power-saving feature if you want the appliance to turn off automatically.
To select the Off time, press the “TIMER” button on the remote control or fan control
panel once. It will advance to 1 hour as indicated by the number display, the “Timer”
indicator symbol will illuminate and the fan will turn off after approximately 1 hour.
Each consecutive press of the “TIMER” button will advance the timer in 1-hour
increments until it reaches a maximum time of 9 hours.
To reset to a new time, continue to press the “TIMER” button until it cycles back to
where the hour number you desire is displayed.
After the Auto Off time has been set, the display will change back to the fan speed
setting number and will then display the timer setting and Timer indicator light every 5
seconds.
To turn off the timer, continue to press the “TIMER” button until it cycles back to where
“0” is displayed.
If you want to turn the fan off, Press the “ON/OFF” button.
8.4 Oscillating (Swing) Function
The fan is fitted with an Oscillating function where when activated, the fan head will
swing from side to side.
Press the “OSC” button on the remote control or fan control panel to activate the
oscillating function. The fan head will swing from side to side whilst blowing air.
To stop the oscillation at any direction, Press the “OSC” button again.
Note:
Do Not force the head to rotate by hand. Always use the control buttons.
8.5 Using the Smart Phone App
Note: The Smart Home Pedestal Fan and TuyaSmart App only supports a 2.4GHz
Wi-Fi network. It will not work on a 5GHz network.
•
After pairing your fan and phone, and with the smart phone App open you can turn the
fan on by pressing the “Switch” button at the bottom left of the screen.
•
The fan will start in the default speed setting and in “Normal” mode. (refer to Modes in
the section “Fan Modes” in this instruction manual to understand what the modes do).
•
With the fan on, you can adjust the fan speed by either tapping on the speed slider or
by dragging the slider to your desired position.
Summary of Contents for HEGSM40
Page 2: ...Page 2 of 28 ...
Page 28: ...Page 28 of 28 ...
