Page 7 of 12
4 Operation
Important:
Refer to the Section “Preparation” prior to Operation.
•
Plug the power cord into the Power Point and switch on.
4.1 ON / OFF
•
Press the On / Off button located on the top right front of the unit and
the unit will start to work.
•
This will be indicated by the indicator light inside the On / Off button
illuminating blue.
Note
: If the water tank is full of water, or the water container is not
inserted properly, the indicator light will blink blue colour.
•
To turn the unit off, press the On / Off button again and the light will
also turn off.
4.2 Water Collection Tank Full
•
When the water level reaches its full level, the water level sensor will
activate preventing the unit from producing more water, and the indicator
light inside the On / Off button will blink blue colour.
•
To empty the Water Collection Tank, first switch off the unit by pressing
the On / Off button and then unplug the power cord from the power point.