anko EV-6803-S259, Manual, Page: 20 / 28

Page 20 of 28
The black foam filter can just be tapped clean. Do not wash.
If needed, wash the white filter and filter holder in warm mild soapy water,
rinse in clean fresh cold water and let them completely dry.
DO NOT scrub the filter or filter holder, or place them in a dishwasher.
DO NOT use a hairdryer to dry the white filter or filter holder.
Refit the black foam filter to the filter holder and then refit the white filter (or
replace it with a new one) in the reverse method used for disassembly.
10.2 Exhaust Filter
The filter which filters the exhaust air is a HEPA filter and needs to be cleaned
(or replaced) regularly for the best suction performance and to prevent
overheating and damage to your vacuum cleaner.
The filter is located above the handle and on the left side where the exhaust
air exits.
To access the filter, rotate the cover anticlockwise and pull away to expose
the filter.
Grasp the filter and pull straight out.