5
NOTE:
The appliance will enter sleep mode automatically after 9 minutes if it has not
been manually switched OFF at the completion of brewing. You can wake up the
appliance by pressing the coffee button. After waking up, the red indicator will flash,
you should only brew coffee when the indicator turns to green, otherwise the coffee
temperature will be too low.
CLEANING AND MAINTENANCE
Be sure to unplug this appliance before cleaning. To protect against electrical shock, do
not immerse the power cord, plug or unit in water or liquid. After each use, always make
sure the supply cord plug is first removed from mains power outlet. We recommend that
the following is performed on a periodical basis:
1. Use a dry cloth to wash the removable water tank.
2. Empty the capsule collection tray and rinse it.
3. Clean the capsule gate with a dry cloth.
4. Use a damp cloth to gently wipe the cup holder grid.
5. Clean the machine using a damp cloth, never submerge the machine in water or other
liquids.
6. Replace all parts and keep for next use.
REMOVING MINERAL DEPOSITS
To keep your coffee maker operating efficiently, you should regularly clean the mineral
deposits left by water. The frequency of cleaning will depend on water quality in your area
and the frequency of use of the appliance. For this purpose we recommend using a
commercially available kettle descaling solution and follow the instructions found on the
descaler bottle:
1. Fill with water and descaler to the MAX level on the water tank.
(for correct mixture refer to the instructions supplied with the descaler solution for details).
2. Press the power ON button, the red indicator will flash. Wait until the green indicator
light turns ON.
3. Position a empty container on the drip tray cover.
4. Press the coffee button and allow the liquid to flow for 1 minute. Then stop the flow by
press the coffee button again.
5. Wait for 20 minutes with the machine turned ON.
