![anko CH1117AS Manual Download Page 3](http://html1.mh-extra.com/html/anko/ch1117as/ch1117as_manual_2944423003.webp)
4
5
IMPORTANT! The continuous operating time must not exceed
30 seconds when using the chopper.
Allow the appliance t o c oo l d ow n at least 2 minutes between
2 running cycles. After operating 3 cycles continuously, a l l o w
t h e a p p l i a n c e t o c ool d o w n for 30 minutes to before
using it again. Failing to follow these instructions may cause
electric motor failure.
•
The capacity of the ingredients must not exceed
the maximum capacity (500ml) of the chopper bowl.
• Do not use the appliance to chop hard ingredients.
• Do not exceed the quantities and maximum time
indicated in the operation guidelines or processing
guide.
• Take the blade unit off before cleaning.
• The use of attachments not supplied with the product
may cause a risk of injury to persons.
• Avoid coming in contact with moving
parts.
• Keep fingers, hair, clothing and utensils away from
moving parts.
IMPORTANT! Keep hands and utensils out of the chopping
bowl while chopping or mixing to a v o i d the risk of severe
injury to persons or damage to the chopper.
2
. Description of Parts
1). Button I
2). Button II
3). Main body (motor unit)
4). Blade support
5). Blade
6). Chopping bowl
3. Specification:
• Model: CH1117AS
• Rating: 220-240V 50-60Hz 260W
4. Operation Guidelines
Caution:
Blades are sharp. Handle carefully.
Before using for the first time
Remove all packaging.
To use the chopper
• Wash the blade unit and the chopping bowl in
warm water. Wipe it dry.
• Fix the blade unit in the chopping bowl.
• Fill the bowl with food (not more than the maximum indicated
level 500ml).
• Fit the main body (motor unit) onto the chopping
bowl.
• Ensure the power cord is not damaged and the main body is in
place.
• Connect the appliance into a mains power outlet. Turn ON the
appliance by pressing and holding down the power switch button
(the marking
of “I” is for the lower speed, “II” for the higher speed.).
• Hold the outside of the chopping bowl with the other hand
while operating.
• After you have completed chopping, release the power switch
button, then disconnect it from mains power outlet.
WARNING: To prevent damage to the electric motor, the
continuous operating time must be less than 30 seconds. Allow
the appliance to rest at least 2 minutes between 2 running
cycles. After operating 3 continuous cycles, allow the appliance
to cool down for 30 minutes before using it again.
Never chop hot oil or fat.
• If your chopper gets blocked, first stop and d i s c o n n e c t
t h e a p p l i a n c e f r o m m a i n s p o w e r before clearing.
• After use, disconnect from mains power.