To remove the brush barrel, press the “brush release buttons” then pull the brush off
the appliance as shown above.
There are 2 “brush release buttons” at the top end of the barrel, press them together
when pulling.
To insert the barrel, line up the brush and press towards the main unit. A ‘click’ sound
will be heard when barrel is fixed and in place.
UNBLOCKING THE REAR GRILLE
Make sure the hot air styler is disconnected from the mains power outlet socket.
If during use, the air inlet grille becomes clogged or blocked with dust or dirt, remove
dust or hair by using a dry brush.
The unit should be cleaned at least once a month
Clean the appliance with a soft, slightly damp cloth. Make sure that no moisture has
entered the appliance during cleaning.
CLEANING AND MAINTENANCE
Attention!
Turn OFF the appliance before cleaning by disconnecting the supply cord
plug from the mains power outlet socket.
Attention!
Do not use any alcohol, acetone, gasoline, abrasive cleaning agents, etc. to
clean the plastic components. Do not use hard brushes or metal objects for cleaning.
Risk of burning! Do not clean the appliance while still hot.
Wipe the appliance with a dry cloth.
Never submerge the appliance in water or let water run over the heating plates on the
appliance.
Clean the air inlet opening from time to time with a fine brush.