background image

5 | 

P a g e

 

 

BEFORE FIRST USE 

 

After unpacking the appliance, check for transport damage and that all the parts 
mentioned in this manual are present. In the event of damaged or missing parts, return 
the product back to Kmart. 

 

Do not discard the original box. It can be used for storage and dispatch to avoid 
transport damage. 

 

Clean the appliance as described in Cleaning and Maintenance. For your safety, make 
particular attention to the safety instructions supplied in the instructions manual when 
using this product. 
 

CHARGING 

 

Fully charge the appliance before first use. 

 

Please make sure the power is OFF before charging. 

 

Battery level indicator flash when charging (Fig.1); all 4 battery levels display when it is 
fully charged (Fig.2). 

 

 

Fig.1 

Fig.2 

 

 

Charging time is approximately 4 hours. 

 

When fully charged, auto curler works for approximately 40 minutes. 

 

Auto curler ‘beeps’ when battery is low. Reconnect the unit to 

a 2Amp USB charger or 

charging port to recharge. 

 

For best performance, always fully charge the curler before use. 
 

Note: The auto curler will not function while charging.  

 

OPERATION 
WARNING!

 Never touch the hot curling barrel. 

WARNING!

 Always use the handle to hold the curler 

ATTENTION!

 The curling barrel cool down slower than it heats up. 

 

Place the appliance on a stable, flat, dry, heat resistant surface. 

 

Press and hold the 

ON/OFF button

 

for 2 seconds to turn on the curler. You will hear a 

beep sound and LCD display will turn on. 

 

User can choose their desired heating temperature and heat time. 

 

Press the 

Mode button

 

 until temperature display is flashing, then press the 

Setting 

Adjustment button 

 to increase the barrel temperature. You may select temperature 

160°C, 180°C and 200°C. 

 

Press the 

Mode button

 

 until time display is flashing, then press the 

Setting 

Adjustment button 

 to increase the heat time. (6, 8, 10, 12 or 14 seconds) 

 

The 

Heating Symbol

 will keep flashing while heating up. 2 beeps and a steady display 

will be shown when the curler had reached the temperature you have set.   

ATTENTION! The barrel heats up very fast. It takes approx. 2 minutes to reach max. 
temperature. 
 

Summary of Contents for BY-222









Reviews: