7
1.
Place the appliance on a flat stable, water-resistant surface near an electrical
outlet before starting. Make sure the cord is away from any water source. It is
acceptable to use an extension cord if needed. DO NOT plug in the appliance
into mains power at this time.
2.
Place the ice shaving chamber into the motor housing so it is seated on the
shaft. Twist the shaft in the direction of the arrow to lock into position. Make
sure that the ice shaving chamber is free from any foreign objects.
3.
Insert the mixing paddle into the slot in the center of the pitcher.
4.
Fill the pitcher with your favorite beverage, liquor, juice or drink mix.
NOTE: Use the lines indicated on the side of the pitcher as a guide for how much
liquid to add. You may choose to make a small or large serving.
5.
Slide pitcher into place on base and turn clockwise until it stops. This will allow
the mixing paddle to mix ice and ingredients once the operation begins.
6.
Turn the selector knob to the desired setting. SLUSH produces a finely shaved
ice; SNOW produces a coarser textured ice.
7.
Place ice in ice shaving chamber. Add enough ice cubes, but not above the top
of ice shaving chamber.
BE CAREFUL when placing ice cubes in ice shaving chamber. The blade is very
sharp.
8.
Plug cord into a mains power outlet.
9.
When you are ready to start making your frozen drink, place the lid on the
appliance and turn counter-clockwise to engage the interlock switch (to turn
power ON/OFF).
OPERATION