17
Starting Your Wash
Starting a cycle wash
1.
Draw out the lower and upper basket, load the dishes and push them back. It is commended to load
the lower basket first, then the upper one.
2. Pour in the detergent.
3. Insert the plug into the socket. The power supply refer to last page”Product fiche”.
4. Make sure that the water supply is turned on to full pressure.
5. Close the door, press the Power button, to switch on the machine.
6. Choose a program, the response light will turn on. Then press the Start/Pause button, the
dishwasher will start its cycle.
Changing the program mid cycle
A wash cycle can only be changed if it has been running for a short time otherwise, the detergent may
have already been released and the dishwasher may have already drained the wash water. If this is
the case, the dishwasher needs to be reset and the detergent dispenser must be refilled. To reset the
dishwasher, follow the instructions below:
1.
Press the Start/Pause button to pause the washing.
2. Press the Program button for more than 3 seconds, the dishwasher will enter standby mode.
3. Press the Program button to select the desired program.
4. Press the Start/Pause button, the dishwasher will run after 10 seconds.
Forgot to add a dish?
A forgotten dish can be added any time before the detergent dispenser opens. If this is the case, follow
the instructions below:
1.
Press the Start/Pause button to pause the washing.
2. After the spray arms stop working, you can open the door completely.
3. Add the forgotten dishes.
4. Close the door.
5. Press the Start/Pause button after 10 seconds, the dishwasher will start.
WARNING!
It is dangerous to open the door mid-cycle, as hot steam may scald you.
Starting A Cycle Wash
1.
Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the upper one.
2.
Pour in the detergent.
3.
Insert the plug into the socket. The power supply refer to last page”Product fiche”.
Make sure that the water supply is turned on to full pressure.
4.
Close the door, press the Power button, to switch on the machine.
5.
Choose a program, the response light will turn on. Then press the Start/Pause
button, the dishwasher will start its cycle.
Changing The Program Mid-cycle
3 sec
A wash cycle can only be changed if it has been running for a short time otherwise,
the detergent may have already been released and the dishwasher may have already
drained the wash water. If this is the case, the dishwasher needs to be reset and the
detergent dispenser must be refilled. To reset the dishwasher, follow the instructions
below:
1.
Press the Start/Pause button to pause the washing.
2.
Press the Program button for more than 3 seconds, the dishwasher will enter
standby mode.
3.
Press the Program button to select the desired program.
4.
Press the Start/Pause button, the dishwasher will run after 10 seconds.
22
AS/NZS 2007.1:
test in accordance with AS/NZS 2007.1.
This program is the test cycle. The information for comparability
NOTE
:
Forget To Add A Dish?
After 5 sec
WARNING
It is dangerous to open the door
mid-cycle, as hot steam may
scald you.
A forgotten dish can be added any time before the detergent dispenser opens. If
this is the case, follow the instructions below:
1.
Press the Start/Pause button to pause the washing.
2.
After the spray arms stop working, you can open the door completely.
3.
Add the forgotten dishes.
4.
Close the door.
5.
Press the Start/Pause button after 10 seconds, the dishwasher will start.
23
