Operation Instructions
Inserting the batteries
1. Remove the battery compartment covers of keyboard and insert one 1.5V AA batteries.
Caution!
Danger of explosion if the batteries are incorrectly replaced.
2. Replace the battery compartment cover again.
Notes on Batteries
> It is recommended to only use Alkaline or Rechargeable batteries.
> If the device is not to be used for an extended period of time, then the batteries should be
removed.
> Batteries do not belong in household waste! Expired batteries must be disposed of in an
environmentally friendly way and according to the applicable legal regulations.
> Please keep the batteries and the device components away from children at all times. If a
battery is swallowed, seek medical attention immediately.
> Batteries must not be recharged or activated with other means, dismantled, thrown into
fire or short-circuited.
> Remove the batteries prior to disposing of the device.
Connecting Keyboard
1. After the batteries are successfully inserted, and toggle the power switch to the ON
position.
2. Plug
the USB receiver to the computer’s USB port, then wireless keyboard will work
normally.
If the keyboard cannot work normally, take out the receiver from computer USB port and
plug again, toggle the power switch again to ON position, and p
ress “ESC+Q” keys at the
same time, the indicator on the top right corner will light up or flash. The matching succeed
once indicator is off after receiver is inserted into.
3. When the battery is running out of the power, the below lower-voltage indicator flashes
green.
Key function
1. When Fn+
is off, Fn indicator light is off, separately press F1~F12 to achieve the
original function;
2. When pressing Fn+
, Fn indicator light is green, separately press F1~F12 to achieve
below shortcut key function.
