1.Mounting plate
Mount your devices to this plate, then mount this plate to the tripod.
2.Mounting plate locking lever
Secures the quick-release plate to the tripod.
3.Vertical tilt locking knob
Adjusts the vertical tilt up to 90 degrees.
4.Horizontal tilt lock handle
Adjusts the horizontal tilt.
5.Pan locking knob
Locks the tripod head so that it will not rotate horizontally.
6.Elevation locking knob
Locks the center column in place.
7.Flip-lever leg locks
Lift to adjust leg height, then close to lock.
8.Rubber feet
Provide a secure, non-slip footing for your tripod.
Technical Data
Remote Control battery: 3V CR2032
Bluetooth connection
If you have used Bluetooth connection before, as soon as you switch on the remote control, the system will
start searching for the device last connected. When the device is found, it will re-connect automatically.
If you want to switch between devices, you have to turn off Bluetooth on the device last connected.
NOTE: Only one Bluetooth device can be connected to the remote control at one time
First Bluetooth connection
1. Push the ON/OFF switch of the remote control to position ON. The blue LED light starts flashing.
2. Turn on Bluetooth on your smart phone. Refer to its user manual for instructions on pairing and
connecting Bluetooth devices.
3.
Select “KM43033041” from the device list.
4. The blue LED stop flashing and stay on when connected successfully.
If you lose connection, press any remote control button to reconnect.
