Technical Data
Power supply: 2 x AAA batteries (Not included)
Support devices up to 6.5 inch.
Instruction
1. Insert the 2 x AAA batteries (not included) into the battery compartment inside the back of
the LED light, Ensure the polarity of the batteries match the polarity inside the battery
compartment.
2. Mount the phone clip on the tripod stand.
3.
Adjust the width/length and place your smart phone in the phone clip.
4.
Hold the stick or unfold the tripod to place it on a flat surface.
5.
Press the ON/OFF button to turn on/ off / switch LED brightness level (High-Medium-Low).
