background image

2

your home, consult your dealer or local power company.
15. The socket outlet must be installed near the equipment and must be 
easily accessible.
16. Do not overload ac outlets or extension cords. Overloading can 
cause fire or electric shock.
17. Devices with class 1 construction should be connect ed to a main 
socket outlet with a protective earthed connection.
18. Devices with class 2 construction do not require a earthed 
connection.
19.
20.

Keep away from rodents. Rodents enjoy biting on power cords.
Always hold the plug when pulling it out of

the main supply socket. 

Do not pull the power cord. This can cause a short circuit.
21. Avoid placing the device on any surfaces that may be subject to 
vibrations or shocks.
22. To clean the device, use a soft dry cloth. Do not use solvents or petrol 
based fluids. To remove severe stains, you may use a damp cloth with dilute 
detergent.
23. Damage

   or lost data caused by malfunction, misuse, modification

 of the device or battery replacement will not be covered under warranty.

24. Do not interrupt the connection when the device is formatting or 
transferring files. Otherwise, data may be corrupted or lost.
25. If the unit has USB playback function, the USB memory stick should be 
plugged into the unit directly. Don’t use a USB extension cable because it 
can cause interference resulting in failing of data.
26. The apparatus shall not be exposed to dripping or splashing and make 
sure that no objects filled with liquids, such as vases, are placed on or near 
the apparatus.
27. To completely disconnect the power  input, the mains plug of the 
apparatus shall be disconnected from the mains, as the disconnect device is 
the mains plug of apparatus.
28. Battery shall not be exposed to excessive heat such as sunshine,

 f ire or the like.

29. Attention should be drawn to the environmental aspects of battery 
disposal.
30.  The unit should only be used in moderate climates. Avoid using in extremely 

31. The rating label has been marked on the bottom or back panel of the 
apparatus.
32. This device is not intended for use by people (including children) with 
physical, sensory or mental disabilities, or a lack of experience and 
knowledge, unless they’re under supervision or have received instructions 
about the correct use of the device by the person who is responsible for their 

cold or extremely warm environments.

Summary of Contents for 42816827

























Reviews: