IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or
injury to persons, including the following:
1.
Read all instructions.
2.
This appliance is not intended for use by persons (including children)
with reduced physical, sensory, or mental capabilities, or lack of
experience and knowledge, unless they are closely supervised and
instructed concerning use of the appliance by a person responsible
for their safety.
3.
Close supervision is necessary when any appliance is used by or near
children. Children should be supervised to ensure that they do not
play with the appliance.
4.
To protect against risk of electrical shock, do not put unit, cord, or
plug in water or other liquid.
5.
Unplug from outlet when not in use, before putting on or taking off
parts, and before cleaning.
6.
Avoid contacting moving parts.
IMPORTANT! If the supply cord is damaged, it must be replaced by
qualified electrical person in order to avoid a hazard or the product
must be disposed.
7.
Do not immerse power cord, plug or product in water or other liquids. If
the product falls into water, immediately unplug it from the electrical
outlet. Do not touch or reach into the water.
8.
Care is need when handling cutting blades, especially when removing
the blade from the chamber, emptying the chamber and during
cleaning.
9.
Misuse may cause injury.
10.
This product is for household use only, not designed for commercial
use.
11.
The use of attachments not recommended or sold by
the manufacturer may cause fire, electric shock, or
injury.
12.
Do not use outdoors.
13.
Do not let cord hang over edge of table or counter or touch
hot surfaces, including stove.
14.
Do not place on or near a hot gas or electric burner, or
in a heated oven.
15.
Check removable grinding chamber for presence of foreign
objects before use.
16.
Do not use appliance for other than intended purpose.
CAUTION: Do not remove grinding cover until blade has
completely stopped rotating.
17.
Be certain cover is securely locked in place before
operating the appliance.
18.
Do not attempt to defeat the interlock mechanism on the cover.
19.
To disconnect, turn OFF (
O
); then remove plug from mains power outlet.
WARNING: The maximum operating time is 40 second. Allow it to rest
for at least 1 minute before using it again. After 3 cycles of operation,
allow the coffee grinder (electric motor) to cool down to room
temperature for approx. 30 minutes before using it again. Failing to
follow the above instructions may cause electric motor burnout.
SAVE THESE INSTRUCTIONS!
