Anker Nebula Apollo, User Manual, Page: 10 / 91

EN EN
17 18
[Projector Mode]
[Front Projection]: The projector is located
in front of the projection surface.
[Rear Projection]: The projector is located
behind the projection surface.
[Inverted Front Projection]: The projector
is hanging from the ceiling in an upside
down position. The image is rotated by
180 degrees.
[Inverted Rear Projection]: The projector is
hanging from the ceiling in an upside down
position behind the projection surface.
The image is rotated by 180 degrees and
horizontally mirrored.
4.
App Manager
① Press to access the home menu, select [Settings] > [App
Manager] , and press .
② Select an app and check the current version, open or force stop the
app, check the storage used or clear data, or uninstall the app.
T
When more than 3 apps are installed, you can select [All] at
the bottom line of the home page to access the [Apps] page
or App Store on the home page. Select an app and press
on the remote control, and then you can select
[Move To
Home] or [Uninstall] .
5.
Others
On the home menu, select [Settings] to find more setting options.
[General]
[Language] Select an on-screen display language.
[Keypad Tone] Turn on / off the keypad tone.
[Automatic Sleep Interval] 5 min / 15 min / 30 min
[Background] Select a background.
[Clear Cache] Clear the cached data stored on the projector.
[Screen Mirroring] Activate screen mirroring.
[Date & Time]
[Automatic Date & Time] Enable / disable automatic date and time.
[Date] Manually set date.
[Time] Manually set time.
[Select Time Zone] Select time zone.
[Use 24-Hour Format] Select 24-hour format or 12-hour format.
[Upgrade]
[Check Update]
Check if it is the latest version. Follow the
on-screen instructions to upgrade the
firmware version.
[About]
[Recovery]
All data on the built-in storage will be
erased.