background image

12

   English

English   

13

NOTICE 

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) this device may not cause harmful interference, and (2) 
this device must accept any interference received, including interference that may 
cause undesired operation.

Warning: 

Changes or modifications not expressly approved by the party responsible 

for compliance could void the user's authority to operate the equipment.

Note:

 This equipment has been tested and found to comply with the limits for a Class 

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential installation. 
This equipment generates uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference 
to radio communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful interference to 
radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more of 
the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the 
separation between the equipment and receiver. (3) Connect the equipment into an 
outlet on a circuit different from that to which the receiver is connected. (4) Consult 
the dealer or an experienced radio/ TV technician for help. 

FCC Radio Frequency Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device 
can be used in fixed / mobile exposure condition. The min separation distance is 20cm. 

Notice: 

Shielded cables

All connections to other computing devices must be made using shielded cables to 
maintain compliance with FCC regulations.
The following importer is the responsible party. 
Company Name: POWER MOBILE LIFE, LLC  
Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541
Telephone: 1-800-988-7973

  This product complies with the radio interference requirements of the European 

Community.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this device is in compliance with 
the essential requirements and other relevant provisions of Directive 2014/53/EU. 
For the declaration of conformity, visit www.eufylife.com.
Do not use the Device in the environment at too high or too low temperature, never 
expose the Device under strong sunshine or too wet environment.
The suitable temperature for the product and accessories is -10°C-40°C.
RF exposure information: The Maximum Permissible Exposure (MPE) level has been 
calculated based on a distance of d=20 cm between the device and the human body. 
To maintain compliance with RF exposure requirement, use product that maintain a 
20cm distance between the device and the human body.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT 
TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
SUB-1G Frequency range: 866~866.8MHz (for EU) ; 920~920.8MHz (for US)
Max Output Power: 6.496dBm (ERIP)

  This product is designed and manufactured with high quality materials and 

components, which can be recycled and reused. 

  This symbol means the product must not be discarded as household waste, 

and should be delivered to an appropriate collection facility for recycling. 
Proper disposal and recycling helps protect natural resources, human health 
and the environment. For more information on disposal and recycling of this 
product, contact your local municipality, disposal service, or the shop where 
you bought this product.

IC Statement 

This device complies with Industry Canada licence-exempt RSS standard(s). Operation 
is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause 
undesired operation of the device."
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux 
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions 
suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si 

Summary of Contents for EUFY T8910










Reviews: