EN
15
3. Charge Your Projector
For first-time use, fully charge your projector using the provided adapter
and charging cable.
4. Power On / Off
Press and hold the projector power button for 3 seconds to power on / off.
3”
ON
OFF
T
•
You can also press and hold the power button on the
remote for 3 seconds to power off.
•
When powered on, press the power button on the projector
or remote to switch to standby mode.
•
In HMDI Source Mode, the projector will switch to standby
mode after 10 minutes of button inactivity or when no
signal is detected.
•
When standby mode lasts for 30 minutes, the projector
will automatically power off.