Animon AR-132, Product Manual, Page: 12 / 16

Mounting to a Wall
Two screws and fasteners are included with this unit for mounting on walls, drill the
screws into a suitable wall or upright surface. Align the notches on the back cover with the
screws and hang the unit.If installing the unit outdoors, place it at the height of the pests if
possible, If not,tilt the unit downwards slightly to capture the pests in the device’s effective
range(see diagram on page 7). The unit must be aimed at the direction of the pests with
no objects(e.g. Windows, walls or fences) in front of it.
Training a Pet :
Some people try the device out on their pets to see if it works or to train their pet not to
enter a particular area. It’s important to remember that your pet is used to living
comfortably in your home. He may be annoyed by the sound, but he may not be deterred
from the room, As far as he is concerned your home is his proper place.An outdoor animal
on the other hand is sensitive to noise and the alert to danger. The same way an alarm will
repel an intruder, the ultrasonic signal will repel an unwanted animal.
If you want to use the ultrasonic device to deter your cat or dog from a part of the house,
you may have to train them. When the device activates, show them what to do.
Demonstrate to them that it’s time to leave the room when they hear the noise and that
doing this will stop the noise. Dogs will, of course ,be easier to train than cat.
Note:
Just like your pet, wild animals will have certain habits and behaviour s that can
change over time. If they are accustomed to finding food in your backyard, they may
continue to come even if they are disturbed by the ultrasonic, especially if they can’t find
food elsewhere. The device is designed to to work in combination with other good pest
management practices. For tips on how to keep pests away, see page 18.