2015/02 Rev. 3.0
M-LINE
33
GB
3.2.3 Connection to the water mains
Connect the appliance using the water hose to an easily accessible aeration tap that can
be quickly closed if problems arise.
3.2.4 Water drainage (18)
If the reservoir of the coffee maker is overfilled owing to a defect, the excessive water will
be discharged via the water drain (18) at the bottom of the appliance. Make allowance
for this when positioning the appliance!
3.2.5 first time use
When used for the first time the appliance works according to the standard factory set-
tings. The various settings can be altered by authorised personnel. See chapter 5.
Settings.
1. Connect the water connection hose (supplied) to the swivel nut on the back of the
appliance and to a manually-operated aeration tap. NB! Only cold water.
Open the water tap and check the connection for leaks.
2. Slide an empty basket filter (3) into the appliance and place an empty jug (with lid)
under it.
3. Check if all on/off switches (1 + 2, if present) are at the 0 position.
4. Put the plug in the socket.
5. Switch on the appliance of the coffee maker by setting the on/off switch (1) to
position I. The indicator lights (5.2) and (5.3) lights will light up and you will hear a
signal. The display (5.1) will then show the preset standard number of cups.
6. Press the start/stop button and the internal reservoir will fill up. Press the start/stop
button again if water has not started flowing after three minutes.
7. The green indicator light (5.3) will now light up until the appliance has finished
making the coffee.
8. Once the appliance has completed the process a signal will sound after about 1.5
minutes and the green indicator light (5.3) will go out.
9. Follow the above procedure again for the other coffee maker if the model has a
double coffee making system (M(T)202W).
10. After emptying the jug, the coffee maker is ready for use.
11. Switch the water boiler on by turning the on/off switch(13) to 1. The indicator lights
(12.1) and (12.2) will light up. The water boiler will fill automatically and the water
heats up. During the filling, the yellow indicator light will be on.
The green indicator light (12.2) will light up when the water is heated sufficiently.
12. Tap (11) all of the first heated water out of the water boiler and discard it.
The water boiler will refill with fresh water automatically. Fill up the water boiler with
fresh water. After this, the appliance is ready for use.
WARNING
• Ensure that the mains lead does not come into
contact with the hot plates (if present).
Summary of Contents for M200W
Page 28: ...2015 02 Rev 3 0 M LINE...
