15
F6
Tool
Press This will bring up the
Tool Page.
Area #!
Area #2
Area #3
Area #6
Area #7
Area #8
Area #9
Area #10
Area #11
Area#4
Area #5
Area #1
Machine position relative to part Zero.
Area #2
Machine position relative to machine zero.
Area #3
Tool information , Feed , RPM and Fixture offset.
Area #4
Jog , spindle and Coolant condition.
Area #5
Active line.
Area #6
Tool number.
Area #7
Tool diameter.
Area #8
Tool length offset.
Area #9
. RPM’s only input if M-Functions or an inverter is installed.
Area #10
Spindle forward or reverse same conditions as above apply.
Area #11
Coolant on or off must have M-Functions.