p.11
Anglerfish Crea ve Ligh ng | AFCL-HD57 4K HDMI
Bulkhead Connector Installation
A er installing the bulkhead onto the camera housing using the supplied
bulkhead adaptors shown on page 7, it is necessary to select one of six
angled HDMI connectors that is appropriate for your camera and housing
design. The following op ons are available:
1.
Right Angle HDMI Type D (Micro)
2.
Le Angle HDMI Type D (Micro)
3.
Right Angle HDMI Type C (Mini)
4.
Le Angle HDMI Type C (Mini)
5.
Right Angle HDMI Type A (Standard)
6.
Le Angle HDMI Type A (Standard)
Before you select the proper HDMI connector, review your
camera’s opera onal manual and understand which type of
connector is required (Type A, C, D).
Visualize and think about the cable rou ng that would be best
for your camera / housing. Then select the right or le angle
op on. Do not try to connect the connector to the camera
without thinking about the cable rou ng.
Doing so will result
in cable strain, damage to the bulkhead connector or the
camera.
HDMI Connectors are sensi ve and fragile. Applying too much
strain or excessive bending will result in cable failure.
