6
Attaching the Diffuser Sock
It is recommended that the diffuser sock
is placed on the LED array before adding
any other accessories.
1. Lay the LED array faceup on a flat,
clean surface.
2. Look for the elastic band on the bottom
of the sock, and wrap it around the base
of the array. Fit the sock over the ring
light so that the dark fabric band is on
the inside of the ring. Stretch the elastic
edge of the sock over the outside of the
ring. Secure the sock with the attached
touch-fastener straps.
Note: When fitting the diffuser sock
over the array, make sure the touch
fasteners are on the outside of the sock.
2
