29
* NC = Normal Close: The signal loop is closed under normal condition.
When the loop becomes open, alarm will be triggered till the loop becomes
closed again. In other words, if the loop keeps opening for a period of time,
alarm will keep on being triggered in that time interval.
* NO = Normal Open: The signal loop is opened under normal condition.
When the loop becomes closed, alarm will be triggered till the loop
becomes opened again. In other words, if the loop keeps closing for a
period of time, alarm will keep on being triggered in that time interval.
*Full: Full screen
C. Use
/
/
/
to select item for setting.
D. Use
/
button to select ON/OFF the status and 1~60 seconds for the
time.
E. Press
Menu button to exit.
7.3 Sequence Setup
A. Use
/
button to select [SEQUENCE SETUP] setting section.
B. Press
button to enter [SEQUENCE SETUP] select mode.
(1~10 seconds to be selected.)
C. Use
/
button to select value.
D. Press
Menu button to exit.
ALARM OUTPUT SETUP
CH TRIGGER ALARM VIDEO MOTION
SECOND INPUT LOSS DETECT
1 [ 10 ] [YES] [YES] [YES ]
SEQUENCE SETUP
FULL SCREEN: [0 1 ] SEC
