IT
GB
DE
FR
ES
- 24 -
C
139
614
702
.fm
English
To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Pull off the knob
(A)
.
3 - Undo the screws
(B)
and remove the control
panel
(C)
.
4 - Unscrew the nozzle
(D)
and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
5 - Replace the control panel
(C)
and the knobs
(A)
on completion of the operation.
To carry out this operation, proceed as fol-
lows.
1 - Turn off the gas supply tap.
2 - Pull off the knob
(A)
.
3 - Undo the screws
(B)
and remove the control
panel
(C)
.
4 - Unscrew the union
(D)
.
5 - Remove the nozzle
(E)
and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
6 - Retighten the union
(D)
.
7 - Replace the control panel
(C)
and the knobs
(A)
on completion of the operation.
Important
This operation must be carried out by
skilled operatives in compliance with the le-
gal requirements with regard to safety at
work. Never dump non-biodegradable ma-
terials, lubricating oils and non-metallic
components (rubber, PVC, resins, etc.) in
the environment. Dispose of them in ac-
cordance with the relevant legal require-
ments.
REPLACEMENT OF THE BURNER NOZZLE
REPLACEMENT OF THE PILOT LIGHT INJECTOR
DECOMMISSIONING THE APPLIANCE
IDM-39614701500.tif
C
B
E
A
B
D
IDM-39614701300.tif
C
A
B
B
D
