Songbird Serenade Fountain
AD97017
We hope you will find these instructions helpful in setting up your product.
If you have any issues with this item, DO NOT return the unit to place of purchase.
Please visit our web site
www.angelodecor.com
for assistance and warranty information.
Pull the excess cord through
the bowl as shown above.
Pass the power cord down the
cord pipe.
Carefully rest the bowl on its side
and pass the cord down the
pedestal. Align it with the groove at
the base .
Twist and lock the bowl to the
pedestal.
Pump is preset to full strength.
Adjust as needed.
Connect the pump to the tubing
from the top piece.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
Product must be properly stored for winter.
Pull the excess cord through
the bowl as shown above.
Pass the power cord down the
cord pipe.
Carefully rest the bowl on its side
and pass the cord down the
pedestal. Align it with the groove at
the base .
Twist and lock the bowl to the
pedestal.
Pump is preset to full strength.
Adjust as needed.
Connect the pump to the tubing
from the top piece.
Place the pump flat inside the reservoir. Lower the top over the pump
and twist and lock it to the bowl. Ensure the tubing is not kinked or
interfering with the assembly.
The final assembly
should look like this
Locate and attach the decorative birds. The lighter
coloured bird on the left, darker coloured bird on the right.
