SAFETY
These pond pumps are carefully inspected and tested to ensure both safety and operating
performance. However, failure to follow the instructions and warnings in this guide may result in
pump damage and/or serious injury. There will be no liability for any damage resulting from
failure to observe this guide’s instructions.
1.
To reduce risk of electric shock, always disconnect the pump from the electrical
supply before handling or cleaning the pump.
2.
To reduce risk of electric shock, inspect the pump and cord for damage before
installation or maintenance — replace pump if damage is found.
3.
Do not exceed voltage indicated on the label.
Pump
U
must be connected to an
approved ground fault circuit interrupter
U
(GFCI) receptacle
.
4.
Always keep the cord away from high temperature.
5.
To achieve best performance, the pump should be placed on a flat surface and
completely submerged in the water.
6.
Do not let the pump run dry as this will shorten the pump’s life.
7.
Do not lift, hang, or pull the pump by the power cord.
LIMITED WARRANTY
This pump is warranted to the original user against defective materials and workmanship for
a period of 12 months. Our limited warranty does not cover any costs associated with the
installation or removal of products subject to warranty claims or the cost of return of the
pump. The warranty will commence from the date of purchase. Replacement liability is
limited to any part or parts of the unit which have failed due to defective material or
workmanship. Proof of purchase is required for all claims against the limited warranty.
This warranty does not extend to damage of the product or part resulting from accident,
misuse, alteration, neglect, abuse, improper installation or normal wear and tear to the
product(s). This limited warranty extends only to the original user of the product.
FOUNTAIN / POND PUMP
COMPONENTS
01. Pump Housing
02. Impeller Assembly
03. Impeller Cover
04. Pre-Filter
05. Pump Output
06. Flow Control
07. ¾” / 1” Output
08. Power Cord
IMPORTANT! BEFORE YOU BEGIN:
This pump is designed for use in “
clean water applications
”, if you are using
ONLY
the
integrated pre-filter cartridge. It is not compatible with salt water.
Using this series of pump in an outdoor functional pond environment without using proper
filtration will cause increased maintenance and could result in pump failure due to a
build-up of debris.
This type of improper pump care is not covered under warranty.
We strongly recommend using this pump with our
Pond Building Series™
Filters (sold
separately), as they include mechanical and biological components that are designed to
protect your pump while improving water quality.
This pump is ideally suited to use in conjunction with our Pond Filter Box 600.
For maximum satisfaction with your project we suggest choosing a filter that slightly
exceeds your current pond plan as most consumers will upgrade features, fish, and plants
during the life cycle of your project.
QUESTIONS?
U
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.
Visit our website for more information and
videos on how to assemble and properly use your product.
For more information on this and other products, please visit our web site:
To contact us regarding this unit, your options include:
Email:[email protected] | Phone: (780) 453 - 6646 | Fax: (780) 453- 6620
Angelo Décor International Inc. | 15840 – 118
th
Avenue | Edmonton, AB |T5V 1C4
Diagram #1
01
04
03
08
02
05
AD40402
