5.1 - OUT-OF-RANGE
Your monitor has an Out-of-Range function that advises you when the Parent Unit
cannot receive the signal from the Nursery Unit. Out-of-Range situations can be
caused by distance or by physical interferences.
RANGE:
Up to 250 meters / 820 ft (open field)
TO ACTIVATE THIS FUNCTION:
OUT-OF-RANGE ALARM
• Alarm activates when your two units are not communicating.
• The Parent Unit will emit a double beep every 8 seconds.
• Out of Range Icon will flash on the screen.
IMPORTANT
If the Parent Unit is OFF after out of range function being set ON, it is needed to reset
and reactivate the function to ON again. To reset it, make sure the Parent Unit is ON
again and slide the Nursery Unit switch to OFF and then slide the switch to ON again
as to reactivate the Out of range function.
STEP 5 – ACTIVATE AND DEACTIVATE ADDITIONAL FUNCTIONS
The Angelcare
®
monitor can be used with the pre-program factory settings
or you can also customize your settings to your preference.
TO STOP THE OUT-OF-RANGE ALARM:
Press 2 seconds
to turn the Parent
Unit OFF
OR
Turn the Nursery
Unit ON
Slide the
Out-of-Range
button
on the Nursery Unit
to turn it
ON
or
OFF
.
The Out-of-Range Indicator
will blinks on the Parent Unit.
The Out-of range Icon will also flash
when channel is being changed or
the unit is reconnecting
ON
OFF
14
Summary of Contents for AC423
Page 20: ...IM423 INT 101813 ...
