Movement Only
Sound Only
“TIC”, Sound & Movement
Sound & Movement
“TIC” & Movement
IF THE ALARM DOES NOT SOUND
• Avoid contact with crib while Sensor Pad is in operation.
• Place crib near a supporting wall.
• Adjust the Sensor Pad sensitivity level.
1
2
TO TEST SENSOR PAD
MOVEMENT OR “TIC” MODE NEED TO BE ACTIVATED:
MOVEMENT ALARM
• If NO movement is detected after 15 seconds you will hear a single “
TIC
” pre-alarm
sound from the Nursery Unit.
• If after a further 5 seconds there is still NO movement detected both the Parent Unit
and Nursery Unit speakers will a emit loud warning sound.
• Nursery Unit icon flashes on the Parent Unit
• Green light on the Nursery Unit will turn
OFF
to indicate NO movement is being
detected.
1)
Move your hand lightly on the mattress.
Pendulum
icon will appear
on Parent Unit indicator bar.
It will move as you move your
hand and trigger a “
TIC
” sound.
2)
Remove your hand from the mattress.
After 15 seconds you will hear a
“
TIC
” pre-alarm sound, and 5 seconds
later the
Movement Alarm
will trigger.
3)
Repeat by moving your hand lightly in
all four corners of the mattress. Ensure
the
Nursery Unit Movement Indicator
is
still flashing.
5.3 - CHANGING THE MOVEMENT AND SOUND MONITORING FUNCTIONS
TO SET DETECTION MODE:
3
2
1
1)
Press the
MENU
button once and
the flashing icons will appear.
2)
Use the
UP
and
DOWN
Arrows to select
your preferred detection mode.
3)
Press the
SELECT
button to confirm
your choice.
4)
Press the
MENU
to view the next option,
or
EXIT
if you wish to stop programming.
If you press the
MENU
button for too long
the unit will go in to connection mode and the
Out-of-Range
indicator will start flashing. If this
happens, wait 20 seconds and then press
the
MENU
to start again.
17
E
N