TROUBLESHOOTING
FALSE ALARMS
• Turn
OFF
the Nursery Unit.
• Verify the connection between the Sensor Pad and the Nursery Unit.
Unplug and reconnect the cord.
• Make sure there is no bedding between the mattress and the Sensor Pad.
• If the crib has a spring or slat base, place a hardboard between the crib base and the
Sensor Pad measuring at least 13” x 13” (33 x 33 cm) and 1/4 inch (6 mm) thick.
• Make sure Sensor Pad is positioned as described under the setup requirements.
Sensitivity may need to be adjusted, refer to
Step 3.1
.
ALARM WILL NOT SOUND
• Avoid contact with the crib when the monitor is
ON
.
• Place crib near a solid supporting wall to avoid Sensor Pad from detecting movement
from outside the crib.
• Turn
OFF
crib mobile, fans, loud music or anything else that may cause vibration.
• You may need to decrease the sensitivity, refer to
Step 3.1
.
ALARM INDICATOR LIGHT IS FLASHING RED
(MONITOR IS BARELY DETECTING MOVEMENT)
• Make sure there is no bedding between the mattress and the Sensor Pad.
• The Sensor Pad must rest on a completely flat and firm surface. If the crib has a spring
or slat base, place a hard board between the crib base and the Sensor Pad measuring at
least 13” x 13” (33 x 33 cm) and 1/4 inch (6 mm) thick.
• Make sure Sensor Pad is positioned as described under the setup requirements.
Sensitivity may need to be adjusted, refer to
Step 3.1
.
NO POWER
• Check or replace batteries.
• Make sure Monitor is
ON
.
If you experience a problem that is not noted in this manual,
please do not return the product to the store. If you are not completely
satisfied or have any questions:
United States and Canada:
please contact us at: [email protected]
Other countries:
please contact your local distributor.
We may have a simple solution to your problem.
TECHNICAL SPECIFICATIONS
Power Supply:
2 AA alkaline batteries (not included)
Caution:
To reduce the risk of electric shock, do not expose this
product to rain or moisture.
Batteries:
• DO NOT mix old and new batteries.
• DO NOT mix alkaline and standard (carbon-zinc) batteries.
13
E
N
01mf4_ManuelAC300_NA_12010.indd 13
2015-03-17 3:41 PM
