TO ADJUST THE SOUND SENSITIVITY (VOX):
Allows you to determine the sound level needed to trigger sound transmission
to the Parent Unit. This means that sound will only transmit based on the level that you set.
TO ACTIVATE VOX MODE:
1)
Press
Menu/Select
button to access
the main menu.
2)
Select the
Settings
icon to access
sub-menu.
3)
Select the
VOX Sensitivity
icon.
4)
Use the up and down arrows to choose
the desired sensitivity level (
1
to
5
)
5)
Press
Menu/Select
button to confirm.
1)
Press
Menu
icon to access the main menu.
2)
Select the
Settings
icon to access
sub-menu.
3)
Select the
VOX
icon to
activate
or
deactivate
the VOX function.
4)
Press
Menu/Select
button to confirm.
73F
20 sec
ON
1
2
3
73F
4
5
6.2 - HOLD
Allows you to put your monitor on hold.
1)
Press
Menu/Select
button to access
main menu.
2)
Select the
Hold
icon.
OR
Press and hold the Nursery Unit
Pager/
Hold
button for at least 2 seconds.
73F
1
2
6.1 - VOICE ACTIVATION (VOX) OR CONTINUOUS SOUND MODE
Allows you to select your option on how you monitor sound:
VOX
(voice activation picks up sound
based on the setting of the sensitivity level) or
Continuous
(sound monitoring is continuously on,
picking up all sounds).
STEP 6 - ACTIVATING AND DEACTIVATING ADDITIONAL FUNCTIONS
IMPORTANT
When in the menu or sub-menu modes, sound transmission between Parent and Nursery Units will
be temporarily deactivated. ONLY the movement detection alarm will remain active (if function is
activated).
3) Hold
icon will appear on the screen.
4)
Press and hold the Nursery Unit
Pager/Hold
again to return to normal
operation.
Nursery Unit
Night Light
will blink.
Parent Unit will emit 3 consecutive
beeps every 30 seconds to remind
you that monitor is on
Hold
.
IMPORTANT
When your monitor is on
Hold
, the movement-
detection feature and movement alarm are disabled.
73F
3
2
4
NOTE:
By deactivating
VOX
the Continuous
setting is
ON
.
13
E
N
