STEP 3 - TURNING ON YOUR CAMERA
STEP 4 - SELECTING WI-FI OR ACCESS POINT MODE
STEP 5 - CONNECTING YOUR MOBILE DEVICE TO THE CAMERA
1
1
1)
Press the Camera
POWER ON/OFF
button and wait for the activation sound
(Router activation time is approximately
30 seconds).
NOTE:
Blue night light will start flashing and Status
Light will turn from white to red until a twinkling
sound confirms the complete activation.
2)
Rotate the Camera Adjustment Wheel
to the top position.
1)
Set your Camera to your
preferred mode:
1)
In the Angelcare app, select ‘continue’
to setup your camera.
2)
Type in the network password if your
network has one.
3)
A QR Code will be appear
on your device screen.
4)
Proceed to
STEP 6
.
30
s
2
Internet Mode (go to step 5.1)
Access Point Mode (go to step 5.2)
(no internet connection required)
1
2
3
NOTE:
If you do not have Internet and choose the Access
Point Mode, the Camera will create a local WI-FI
signal.
5.1 - SETTING UP CAMERA(S) VIA
WIRELESS SETUP
10
