6.1
Retraction distance .................................................................................. 21
6.2
Retraction speed ...................................................................................... 22
6.3
Temperature is too high ........................................................................... 22
7.
Overheating ...................................................................................................... 24
7.1
Insufficient cooling ................................................................................... 24
7.2
Print at too high temperature .................................................................. 25
7.3
Printing too fast........................................................................................ 25
7.4
When all above fall, try to print multiple parts at once .......................... 26
8.
Layer Shifting or Misalignment ........................................................................ 27
8.1
Nozzle moves too fast .............................................................................. 28
8.2
Mechanical or Electrical issues ................................................................ 29
9.
Layer Separation and Splitting.......................................................................... 31
9.1
Layer height is too large ........................................................................... 32
9.2
Print temperature is too low .................................................................... 33
10.
Grinding Filament ............................................................................................. 34
10.1
Increase the extruder temperature ....................................................... 35
10.2
Print too fast .......................................................................................... 35
10.3
Check for a nozzle clog ........................................................................... 36
11.
Clogged Extruder .............................................................................................. 37
11.1
Manually push the filament to extruder................................................ 38
11.2
Reload the filament ............................................................................... 38
11.3
Clean out the nozzle .............................................................................. 39
12.
Stops Extruding in the Middle of a Print .......................................................... 40
12.1
Out of filament ....................................................................................... 41