２
List of residual risks requiring protection measures by machine users
(Abbreviated Name: List of Residual Risks)
Product model: " Spray gun :WIDER1 / WIDER2"
2019/5/29 Create
ANEST IWATA Corporation
※
Be sure to read and understand the instruction manual before using the product. This document is a reference material in the instruction manual and must
not be used with only an understanding of the contents of this document.
※
1 "degree of hazard" is classified and described according to the following definitions
DANGER
Contents that are likely to cause death or serious injury if protection measures are not implemented.
WARNING
Contents that may cause death or serious injury if protection measures are not implemented.
CAUTION
Contents that may cause minor injury if protection measures are not implemented
※
2 The symbol shown as "Location on machinery" is the number of the machine section on the Residual Risk Map of the Product. See Residual Risk Map
for specific points on the machinery.
No.
Operatio
nal
Phase
Works
Qualifications
and Training
required for
the work
Location on
the
machinery
*2
Harm
Degree
*1
Type of Harm
Protective measure protective
measure performed by the
machinery user
Instruction
Manual
Referenced
page
1
Use
Preparation
work
During work
A
Warning
A wrong connection between the air joint
and the paint joint may cause paint to
spout from an unexpected place and hit
the operator.
To provide personal protective
equipment
P2
2
Use
All
B
Warning
Ignition and fire caused by static electricity
Use of a hose with a ground and
confirmation of ground
P2
3
Use and
mainten
ance
During work,
decompositi
on and rinse
Default
Warning
Organic solvents, etc., may come into
contact with the eyes and skin, causing
irritation.
To provide personal protective
equipment
P2
4
Use
During work
C
Warning
Tenosynovitis due to repeated pulling of
the trigger
Moderate rest
P2
5
Use
All
Default
Warning
Fire, electrical appliances, etc. ignite, and
fire generatings.
Strict ban on the use of fire
P2
6
Use
Preparation
work
During work
Default
Warning
Supply at specified pressure or higher,
paint spouts from unexpected places,
hitting human body or eyes, blindness
To provide personal protective
equipment
P2
7
Use and
mainten
ance
Preparation
work
During work
Default
Warning
The product is modified, parts other than
genuine parts are used, and an
unexpected
failure
or
accident
generatings.
No modification
Use of genuine parts
P2
8
Use
Preparation
work
During work
Default
Warning
The patient stayed in a location where
noise such as blowing air was generated
for a long time, resulting in hearing loss.
Use of earplugs is recommended.
P2
9
Use and
mainten
ance
During work,
decompositi
on and rinse
Default
Warning
Organic solvent poisoning Due to inhale
of solvent and paint mist
To provide personal protective
equipment
Work in painting booths, etc.
P2
10
Use and
mainten
ance
Preparation
work
During work
A
Warning
If the hoses are triad to be disconnected
under pressurized condition, paint,
cleaning liquid, air, etc. are spouted out
and injured.
To provide personal protective
equipment
Remove residual pressure
P2
11
Mainten
ance
Preparation
work
D
Caution
Needle valve piercing with sharp corners
To provide personal protective
equipment
P2
Residual risk
No.R003-00
Code No.03014490