SAFETY WARNINGS
1. Sparks and open flames are strictly prohibited.
Paints can be highly flammable and can cause fire.
Avoid any ignition sources such as smoking, open flames, electrical goods, etc.
2. Securely ground Multi Spray gun by using air hose with built-in ground wire.
Ground wire : Less than 1M
Ω
. Check the earth stability periodically.
Securely ground pump, Multi Spray gun, workpiece and containers containing paint or sol-
vent. Be sure to use fluid hose with built-in ground wire to have continuous grounding between pump and Multi Spray gun. Use conductive contain-
er containing paint or solvent. If not, insufficient grounding can cause fire and explosion due to static electric sparking.
3. Never use the following HALGOGENATED HYDROCARBON SOLVENTS
which can cause cracks or dissolution on gun body (aluminium) by chemical reaction.
- Unsuitable solvents: methyl chloride, dichloromethane, 1.2-dichloroethane,carbon tetrachloride, trichloroethylene, 1.1.1-trichloroethane
- Be sure that all fluids and solvents are compatible with gun parts.
We can supply a list of materials used to manufacture the product.
1. Never point Multi Spray gun towards people or animals.
Never pull trigger of gun when human body or fingers come near tip of nozzle tip. If done, it can cause inflammation of eyes and skin or bodily injury.
If you feel any abnormality during operation, consult a medical doctor immediately.
2. Never exceed maximum operating pressure and maximum operating temperature.
Use at more than max. operating pressure can cause explosion of Multi Spray gun resulting in great danger.
3. Be sure to release air and fluid pressure before cleaning, disassembling or servicing.
If not, remaining pressure can cause bodily injury due to improper operation or scattering cleaning liquid.
In order to release pressure, first stop supply of fluid and thinner to Multi Spray gun.
1. Use in a well-ventilated site by using spray booth.
If not, poor ventilation can cause organic solvent poisoning and catch fire. If you feel any
abnormality during operation, consult a medical doctor immediately.
2. Always wear protective gear (safety glasses, mask, gloves.)
If not, cleaning liquid, etc., can cause inflammation of eyes and skin.
If you feel something wrong with eyes or skin, immediately see a doctor.
3. Wear earplugs if necessary.
Noise level can exceed 85 dB(A), depending on operating conditions and painting site.
4. Be sure to stop pump, reduce air and fluid pressure down to 0 and securely apply safety
lock of Multi Spray gun before you fit or remove nozzle tip.
Emission of paint or solvent during operation can cause great danger.
5. Never try to stop leaks by hand, when paint leaks.
In case of leaks, stop pump immediately and reduce paint pressure down to 0 pressure.
High pressure paint emitted through small hole can pierce an iron plate and can cause severe injury since
paint can enter human body directly through eyes, mouth or skin. It is very dangerous. If you feel any abnormality or receive any injury, consult a
medical doctor immediately
6. If operators pull the trigger many times during operation, it may cause carpal tunnel syndrome.
Rest if you feel any discomfort in your hand.
7. Vibrations of the spray gun, caused by the pulsation of the pump during prolonged use, can cause the operator to suffer from carpal tun-
nel syndrome.
If you feel any fatigue in your hand, stop painting for a brief pause. Dampen the pulsations caused by the pump, using
damping elements on the inlet connection of the equipment, or by using inlet anti-pulsation hoses able to absorb the pulsations.
1. Never use cracked, damaged, bent or crushed fluid hose.
High pressure paint emitted from small hole can pierce an iron plate and cause great danger.
2. Never bend fluid hose with a radius of less than permitted bend radius.
Contact us, or the shop who sold the hose to you, about permitted bend radius. Never put heavy things on it in order not to damage the hose. If
done, hose can explode causing great danger.
7
2
FIRE OR EXPLOSION HAZARD
IMPROPER USE OF EQUIPMENT
PROTECTION OF HUMAN BODY
BURST FLUID HOSE
SPARE PARTS LIST
DESCRIPTION
REF.PART
AIR CAP SET
1
NOZZLE NEEDLE SET
2
O RING
2-1
NOZZLE GLAND
2-2
FLUID NEEDLE
2-3
O RING
2-4
BODY
3-1
FLUID NIPPLE
3-2
STAY
3-3
AIR NIPPLE
3-4
BOLT
3-5
FLUID NEEDLE PACKING SET
4
WASHER
4-1
SPRING WASHER
4-2
PACKING HOLDER
4-3
FLUID NEEDLE PACKING
4-4/4-5
FLUID NEEDLE PACKING SEAT
5
AIR VALVE BAR
6
AIR VALVE SEAT
7
AIR VALVE
8
AIR VALVE SPRING
9
FLUID ADJUSTMENT GUIDE SET
10
FLUID NEEDLE SPRING
13
PATTERN ADJUSTMENT SET
15
TRIGGER
16
TRIGGER STEM
17
E STOPPER
18
FLUID PIPE
20
JAM NUT
21
FILTER SET
22
FILTER CASE
22-1
FILTER (200 mesh)
22-2
FILTER JOINT
22-3
FILTER NUT
22-4
TRIGGER STOPPER
23
WASHER
24
HEXAGON NUT
25
KNOB
26
SPRING HOLDER
27
NOZZLE TIP (NOT INCLUDED)
28
Marked parts are consumable parts