6
EN
Airless and Multi Spray iCon Pumps
WARNING
SAFETY PRECAUTION
TO ENSURE THE GOOD WORKING OF THE EQUIPMENT AND OF ITS SAFETY DEVICES, THE PUMP MUST
BE INSTALLED BY A QUALIFIED STAFF.
THE ORIGINAL CONFIGURATION OF THE EQUIPMENT MUST BE NOT CHANGED AT ALL.
SECURELY GROUND PUMP, SPRAY GUN BY USING CONDUCTIVE FLUID HOSE AND GROUND WIRE
SUPPLIED WITH EQUIPMENT.
CHECK THE PROPER TIGHTENING OF ALL FITTINGS, SINCE THEIR SUDDEN OPENING CAN
SERIOUSLY INJURE PEOPLE.
CAREFULLY READ AND OBSERVE SAFETY WARNING OF THE INSTRUCTIONL OF THE SPRAY GUNS
TO BE USED.
ICON-Mxxx: MSGS-200 / ICON-Axxx: ALG7 TE
BEFORE INSTALLATION SET THE AIR AND FLUID REGULATORS TO 0 bar.
7. INSTALLATION
VERSIONS
ICON-M333N / ICON-A333N
ICON-M433N / ICON-A433N
Plunger Pump:
PP-3260N
PP-3688N
Air Motor cylinder diameter:
125 mm
160 mm
Weight:
40 Kg
46.5 Kg
Dimensions (LxWxH):
496 x 627 x 1164 mm
Paint filter:
Paint delivery filter
TF-8N (100 Mesh)
Fluid suction filter
50 mesh
15 mesh
Max. fluid working pressure:
224 bar (22.4 MPa)
252 bar (25.2 MPa)
Max. air inlet pressure:
7.0 bar (0.7 MPa)
Pressure ratio:
32:1
36:1
Working temperature:
5°~40° C
Noise level:
99.7 dB(A)
97.2 dB(A)
Compressor required power:
> 1.5 Kw
Fluid output:
Max. fluid delivery
60 ml
88 ml
Max. volume/min.
3.6 l/min.
5.2 l/min.
Max. No. of cycles par minute
60 cyc
Wetted parts
material:
Paint filter set
Body: AISI303 - Filter: AISI304/Polyamide
Suction hose set
Hose: Rubber - Pipe, Filter and Connection: AISI304
Fluid pump
Mainly: AISI303 - PE - PTFE
6. TECHNICAL SPECIFICATIONS
