WARNING!
BE CAREFUL ABOUT EXPLOSION
Be sure to use paint pump at less than max. air inlet pressure (check section 3. specifications).
Use at more than max. air operating pressure can cause explosion of pump resulting in great dan-
ger.
Be sure to use paint pump at less than max. fluid working pressure (check section 3.specification).
Use at more than max. fluid operating pressure can cause explosion of pump resulting in great
danger.
Never bend hose with a radius of less than 50mm. Never put heavy things on it (in order not to
damage the hose). If done, hose can explode causing great danger.
Securely connect hose to avoid leak and looseness. If hose is disconnected during operation,
hazardous hose movement and paint ejection will cause severe bodily injury.
Never use cracked, damaged, bent, crushed or distorted hose. Never use cracked, damaged, bent,
crushed or distorted hose. Leakages from such a hose can cause great danger during operation.
IMPORTANT
Never alter the equipment
When you replace parts, be sure to use our genuine parts. If not done, it can cause insufficient
performance or failure.
Never use the following halogenated hydrocarbon solvents :
methyl chloride, dichloromethane, 1.2-dichloroethane, carbon tetrachloride, trichloroethylene,
1.1.1-trichloroethane which can cause cracks or dissolution on gun body (aluminum) by chemical
reactions. (Be sure that all fluids and solvents are compatible with gun parts. We are ready to
supply a material list used in the gun on request.)
Do not use with corrosive liquids (except for PH6-8)
Install or keep pump free from rain or splashes. If not done, it can cause pump failure
Install pump on a horizontal surface
Install pump free of paint mist. Attached paint mist etc., can cause pump failure
Use clean air filtered through dryer and filter (finer than 50 microns).If not done, it can cause pump
failure.
10
