Anest Iwata ALS 333 C, Instruction And Maintenance Manual

Page: 10 / 48

2.1 Plate data
The manufacturer’s identification plate is applied on the airless unit (see picture below).
It must not be removed at all, even if the equipment is resold. For any communication with the
manufacturer always mention the serial number written on the plate itself.
EC marking –
• Environmental limits (room temperature b 5°C and + 40°C).
• Maximum superficial temperature: temperature class T6.
2.2 The different models
MODELS FOR SOLVENT BASED PAINT
ALS 333 C: ALS 333 C AIRLESS UNIT
Pump type PP 1251 C on trolley with air adjustment, suction pipe, delivery and suction paint filter, fluid
recirculation.
ALS 433 C: ALS 433 C AIRLESS UNIT
Pump type PP 4301 C on trolley with air adjustment, suction pipe, delivery and suction paint filter, fluid
recirculation.
ALS 453 C: ALS 453 C AIRLESS UNIT
Pump type PP 4531 C on trolley with air adjustment, suction pipe, delivery and suction paint filter, fluid
recirculation.
MODELS FOR WATER BASED PAINT
ALS 433 TX: ALS 433 TX AIRLESS UNIT
Pump type PP 4301 CNE on trolley with air adjustment, suction pipe, delivery and suction paint filter, fluid
recirculation.
ALS 423 TX: ALS 423 TX AIRLESS UNIT
Pump type PP 4231 NE on trolley with air adjustment, suction pipe, delivery and suction paint filter, fluid
recirculation.
10
2. PRODUCT IDENTIFICATION
MAX AIR W. P.R. RATIO SERIAL NO.
0.68 MPa / 6.8 bar / 98 psi 25:1
ANEST IWATA EUROPE s.r.l.
C.so Vigevano,46
10155 Torino Italy MANUFACTURED
ALS 333 - AIRLESS UNIT
Serial number
Model
Max. working air pressure