10
Release Date 9 July 2021
Anemoment LLC
Considerations for User-Supplied Mounting Platform for TSM-FB
The User-supplied mounting platform should be a flat plate having a 5-mm hole in the
center for the connecting wires, and 5.5-mm hole positioned at the Gore-Tex™ Vent to
allow for water vapor and air pressure exchange.
TSM-FB Tripod Mounting Plate
Anemoment offers an optional 3d-printed mounting plate for attaching the TSM-FB to a
standard platform or camera tripod. This mounting plate features a brass ¼-20 threaded
insert.
TSM-PM
The TSM-PM has a circular connector to mount over a standard ½” DIN15 Schedule 10 pipe or
22-mm Carbon Fiber Tube. The pipe must be a thin wall type, as indicated by the Schedule 10
designation, to allow an inside diameter wide enough to let the mating cable connector pass
through the pipe.
Before fitting the TSM-PM to the pipe, thread the mating cable through the pipe and snap the
cable connector to the TSM-PM base connector. Then place the TSM-PM over the pipe and
tighten the three set screws to secure. For a detailed description of the internal wiring of the
connector and cable specifications please see Chapter 3: C
ONNECTING
.
TSM-PM Tripod Adapter
As an optional accessory, Anemoment offers a 3d-printed pipe-simulating adapter for
attaching the TSM-PM to a standard platform or camera tripod. This mounting adapter
features a brass ¼-20 threaded insert.
Figure 3: TSM-PM DRAWING
