Anemoment LLC
28
Data Logger 422 User Manual
Sub-Menu Descriptions
Serial Setup Menu
This menu sets parameter
configurations for each of the six serial instruments that may be
connected to the DL422: Instruments 1 through 4, the GPS, and the Radio.
Figure 12: Serial Setup menu
To make a change to a serial instrument’s parameter configuration, first press the “A” key. The
display then shows a new sub-menu for Serial Instrument Selection. Press the letter key indicated to
the left of the desired instrument. The display then returns to the Serial Setup Menu listing the
parameter configuration options for that instrument.
8
“Parameter” is defined in Chapter 8, Section “Serial Data Format”, above.
Figure 13: Serial Instrument Selection Menu