AIRPOLE
18
6
FIRST SWITCH ON TEST
Installers must follow the following procedure for the first-time operation of the Anemoi AIRPOLE fan because
even if all fans are tested before shipping, they can be damaged during storage or shipping.
Before operation, it is recommended to recheck that all bolts and nuts are correctly fastened.
After performing all mechanical and electrical connection steps included in this manual, run the fan as follows:
1- Change the main switch to the start position.
2- Run the fan at a low speed (about 20 rpm / min) for during some minutes by turning the potentiometer.
3- Verify that there is no abnormal noise.
4- Increase its speed gradually.
In the event of any abnormal noise, please contact Anemoi or your distributor.
