7
After prolonged use, the hopper screw will
become loose. This may affect counting accuracy.
To tighten, turn the up/ down screw clockwise.
3.4 Hopper Adjustment
3.3 Error Codes
ERROR-MESSAGE DISPLAY
Adjusting the up/ down screw
OPE RATION
This mode counts bills and adds it to the previous count number
1.Press the [ADD] button. When the ADD LED light is on, this
indicates that this mode is active.
2.Place bills in the hopper and counting will automatically begin.
3.As you insert more bills, it will be added to the previous count.
Code
No.
E01
E02
E03
E04
E05
E10
E11
BF
The left counting sensor is broken or dirty
Malfunction causes
The right counting sensor is broken or dirty
The code disc is dirty or loose
The hopper sensor is broken or dirty
The stacker sensor is broken or dirty
Ambient light is too high
UV sensitivity light is too high
The plastic button is broken or loose
Wheels running without feeding bills
To change a new one or clean it
Solutions
To change a new one or clean it
To clean it or tighten it
To change a new one or clean it
To change a new one or clean it
To lower the ambient light
To lower the UV light
To change a new one or tight the
connector
Press reset and feed bills again
580
Summary of Contents for NX-580
Page 1: ...Money Counter User Manual NX 580...
Page 2: ......
