8
Step 2:
Flip the wheel over and secure the Nub to
the wheel by threading two 6-32 x 1.25 in Hex
Head Screws (am-1437) into the Nub. Be sure to
place the 6-32 screws in opposite holes of the
wheels.
Step 4:
Align the bolt circles of the Nub and the
Pulley Assembly, and secure the pulley by
threading two 6-32 x 0.75 in Hex Head Screws
(am-1424) into the Nub. Be sure to thread the
screws into the opposite holes that were used to
secure the Nub to the Stealth Wheel.
Step 3:
Place two 24 Tooth HTD Pulley Halves
(am-3401) onto the boss of the Nub.
Step 1:
Place a 6mm Round Bore Double
Boss Nub (am-3413a) into the center hole
of a 4" 8mm Bore Stealth Wheel (am-2648)
and align the bolt circles of the Nub and the
Wheel.
4X
Repeat 3 more times to make 4 total Corner Wheel Assemblies.
Corner Wheel Assembly Instructions (QTY 4)
NOTE: For a TileRunner GTO, Bulldozer, Omni, or
Hulk, replace am-2648 with either am-2648_Blk , am-
2648_blue, am-2948, or am-3612 as required.