2
www.andymark.com
Step 1:
Attach the Slide Block to the
Servo Bracket using two 10-32 Phillips
Head Screws.
Step 2:
Screw the Encoder into place.
Step 3:
Slide the Servo through the
servo slot on the Bracket.
Step 4:
Attach and tighten four sets of
8-32 Screws with their respective Nylon
Nuts to set the Servo in place.
Step 5:
Attach and screw on the 12
Tooth Servo Gear onto the Servo.
Linear Servo Assembly/Mount
