Please read these instructions carefully and retain them for future
reference to ensure that the table is used correctly. For your own safety,
please study each step of this instruction manual. &Tradition is not
responsible for any faults or damages caused by not following these
instructions correctly.
Safety precautions
- Dispose of all plastic bags and foam from the packaging and do not allow
children to play with it.
- The modules are only intended for interior use.
- Do not assemble alone.
- To avoid deformation of the legs, please do not lift assembled modules
consisting of more than two seats. Moving of modules consisting of three
or more seats requires disassembly of the modules.
- Handle table tops with care in order not to scratch surface during
assembly.
- Screw might be oiled, so be aware not to get any oil on to the upholstery.
- Take special notice to length of bolts, as too long bolts can damage
certain parts.
- Spilled liquids of any kind should be removed immediately from the table
top as it may penetrate the surface treatment and cause damage to it.
Cleaning instructions
The Isole modules are made from molded CMHR foam with metal inserts
and no-sag springs. The legs are made from powder coated steel and the
table tops from solid colored black MDF with Fenix NTM nano laminate on
the top.
-
Textile:
Dust and dirt will wear down the textile. For daily cleaning,
vacuum the modules with a soft brush mouth piece. For more severe
cleaning and stain removal, please see: www.febrik.com.
-
Legs :
Clean powder coated steel legs with a soft cloth wrung in a solution of
water and universal cleaning detergent and dry immediately with a soft cloth.
-
Table top:
Dust Nano laminate table top with a soft cloth. Clean laminate
table top with a soft cloth wrung in a solution of water and universal
cleaning detergent and dry immediately with a soft cloth. Avoid use of
abrasive cleaning products such as steel wool or polish.
Tools needed
- Allen Key - supplied
- Allen Key developed for power tool - supplied
For faster assembly it is recommended to use a power tool. Take care not
to overtighten the screws as this may cause permanent damage.
I
B
B
E
B
B
G
G
Over
view
O
rder nr
. 7365
Seat - 6pcs. Back - 3pcs. Armr
est - 0pcs.
Tabletop T2 -
2pcs.
Leg B - 4pcs. Leg G - 2pcs. Leg I - 1pcs. Leg E - 1pcs.
Bolt M6x20 - 32pcs. (S
hort
)
Bolt M6x25 - 96pcs. (L
ong
)
Summary of Contents for Isole NN1A-NN1G
Page 5: ......
