Operation
Maintenance and Care
Keypad overview (Fig. C)
1
On / Off
2
Volume / operating mode
3
Accuracy / LED activation
Display overview (Fig. D)
1
"Rotating laser" mode
2
"Line laser" mode
3
Beeper volume: High
4
Beeper volume: Low
5
Beeper volume: Off
6
Battery low
7
Battery Ok
8
Accuracy of readings: Coarse, ± 3 mm
9
Accuracy of readings: Medium, ± 2 mm
10
Accuracy of readings: Fine, ±1 mm
11
Accuracy of readings: Extra fine, ±0,2 mm
Switching the device on / off
Press the On / Off button [1]
Adjusting the volume
!
Press button [2] briefly, if necessary repeated
>
Switches the beeper volume between
High / Low / Off
Selecting the operating mode
!
Press button [2] for >3 seconds
Switches from rotating laser to line laser and
vice versa
Adjusting the accuracy
!
Press button [3] briefly, if necessary repeated
>
Switches the accuracy of readings between
Coarse / Medium / Fine / Extra fine
Activating / Deactivating the LEDs
!
Press button [3] for >3 seconds
Operation
!
Hold the device vertically (in case of a vertical
laser plane: horizontally) and move it towards the
laser plane.
!
Please pay attention to the acoustic signals and
arrows on the (LED) display.
!
>
Display overview (fig. D)
Signs on the display
Acoustic Signals
__________________________________________
12
No
laser
None
__________________________________________
13
Much too low
Fast interval tone
__________________________________________
14
Too low
Fast interval tone
__________________________________________
15
On-grade
Continuous
tone
__________________________________________
16
Too
high
Slow
__________________________________________
17
Much too high
__________________________________________
interval tone
Slow interval tone
Note
When the device is switched on, it is in
the operating mode used before it was
switched off.
!
If in
line laser mode
, the device detects only the
line laser type which was first detected after
power on.
Keep the device always clean, especially the
laser-sensitive area!
!
Do not use aggressive cleaning agents or
solvents.
!
If soiled heavily the device can be cleaned under
running water.
!
Do not use high-pressure cleaner.
!
Allow it to dry completely before storing it in a
closed container. Residual moisture can result in
corrosion of the battery contacts. In this case our
warranty expires.
!
In the unlikely event of a failure or defect, have
the appliance examined and repaired by
AndroTec.
!
In all your queries and spare part orders, always
quote the 8-digit product number (see type plate)
of your device.
Laser Detection at its Best
Page 5
Instruction Manual
Universal Laser Receiver Structor
Model: STR-50R