Fig 5:
Carel 4 button controller.
Cooling is selected through the
controller Main isolating switch
for power isolation
Fig 6:
Normal running conditions will
have the outlet Air temperature
displayed on the controller and
the condensing fan motors on
top of unit will only run when
the unit needs to remove the
heat from the condensing coil
Fig 2 :
Connect the outlet Air Ducting
to the top spigot
450
mm
Connect the inlet Air Ducting to
the bottom spigot
450
mm
Fig 3 :
When the electrical supply is
connected and turned on, the
phase rotation must be
checked inside the electrical
panel. Yellow light indicates
correct phase rotation.
If phase rotation is incorrect
then the controller 3CF1 will
not light up and the unit will
not work
Fig 4:
Fan Speed Controller
Switch. This switch must be
turned to max speed when
ducting is connected to
improve airflow
Fig 5: Control panel
Fig 2
Fig 3
Fig 4
Fig 6
Please note that the product in this photo is an older model.
