Andrew Corporation
Proprietary – Use pursuant to Company Instruction
8 of 8
Installation and Operation Set-Up
The MCPA must be installed into a shelf that provides fan-cooling. The MCPA requires
+24VDC with a current handling capacity of up to 12.4A. An RS-485 interface is
provided and must be utilized to configure the PA for operation and monitoring of alarms
and status. RF cables connect from a radio source to the SMA-type input; from the N-
type output to a filter-duplexer module.
FCC Statements:
FCC ID S8L-100978MCPA
This device complies with Part 2, 15 & 24 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Warning
Changes of modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
