User’s Manual for
MRx18 Dual-/ Triple-Segment and Dual-Band
Page 18
M0139ACC_FCC Manual.doc
5. SO FTWARE SETUP
5.1. LOGIN
Enter user name and password
If an incorrect username or password has been entered, the following error / attention
message
"You have entered the wrong password. Please check the correct usage of upper and
lower cases or check the CAPS LOCK key on your console."
appears and prompts to insert your username or password anew. Click key F5 to
refresh the login mask.
If an incorrect username or password has been entered for three times, the interface to
the repeater is locked for 30 minutes.
5.2. STATUS
In the Status page, which is the
first
tab in the menu bar, actual settings are shown.
The values are referenced to the condition when the status page has been opened.
Furthermore, actual alarms of the MRx18 are listed in this page. No values/ alarms are
captured in case the RF section is switched off (see chapter
5.3.1 Settings - Radio
Frequency
).
The severity of the alarms can be changed in the Settings page (see chapter
5.3.2
Settings - Alarms
). The latency time of each alarm is 10 seconds, i.e. the repeater has
to be in alarm condition for 10 seconds before an alarm is notified.
Summary of Contents for MRx18/x18
Page 23: ......
