3
4
5
6
9
7
8
Remove burrs
Remove part
of insulator
Remove all
copper particles
Slide clamping ring onto cable
Tap outer conductor against
inner edge of helix ring
Screw helix ring onto
outer conductor and
against gasket. Slots
must be at cable end.
Cut slits in outer conductor
at 3/16" (5 mm) intervals
Tap outer conductor
against end of helix
ring and bend tabs
into slots in ring
Apply silicone grease to
gasket threads and screw
gasket against jacket
1/4" (6.3 mm)
